5. Creating Built Distributions¶
Note
This document is being retained solely until the setuptools
documentation
at https://setuptools.pypa.io/en/latest/setuptools.html
independently covers all of the relevant information currently included here.
A “built distribution” is what you’re probably used to thinking of either as a “binary package” or an “installer” (depending on your background). It’s not necessarily binary, though, because it might contain only Python source code and/or byte-code; and we don’t call it a package, because that word is already spoken for in Python. (And “installer” is a term specific to the world of mainstream desktop systems.)
A built distribution is how you make life as easy as possible for installers of your module distribution: for users of RPM-based Linux systems, it’s a binary RPM; for Windows users, it’s an executable installer; for Debian-based Linux users, it’s a Debian package; and so forth. Obviously, no one person will be able to create built distributions for every platform under the sun, so the Distutils are designed to enable module developers to concentrate on their specialty—writing code and creating source distributions—while an intermediary species called packagers springs up to turn source distributions into built distributions for as many platforms as there are packagers.
Of course, the module developer could be their own packager; or the packager could be a volunteer “out there” somewhere who has access to a platform which the original developer does not; or it could be software periodically grabbing new source distributions and turning them into built distributions for as many platforms as the software has access to. Regardless of who they are, a packager uses the setup script and the bdist command family to generate built distributions.
As a simple example, if I run the following command in the Distutils source tree:
python setup.py bdist
then the Distutils builds my module distribution (the Distutils itself in this
case), does a “fake” installation (also in the build
directory), and
creates the default type of built distribution for my platform. The default
format for built distributions is a “dumb” tar file on Unix, and a simple
executable installer on Windows. (That tar file is considered “dumb” because it
has to be unpacked in a specific location to work.)
Thus, the above command on a Unix system creates
Distutils-1.0.plat.tar.gz
; unpacking this tarball from the right place
installs the Distutils just as though you had downloaded the source distribution
and run python setup.py install
. (The “right place” is either the root of
the filesystem or Python’s prefix
directory, depending on the options
given to the bdist_dumb command; the default is to make dumb
distributions relative to prefix
.)
Obviously, for pure Python distributions, this isn’t any simpler than just
running python setup.py install
—but for non-pure distributions, which
include extensions that would need to be compiled, it can mean the difference
between someone being able to use your extensions or not. And creating “smart”
built distributions, such as an RPM package or an executable installer for
Windows, is far more convenient for users even if your distribution doesn’t
include any extensions.
The bdist command has a --formats
option, similar to the
sdist command, which you can use to select the types of built
distribution to generate: for example,
python setup.py bdist --format=zip
would, when run on a Unix system, create
Distutils-1.0.plat.zip
—again, this archive would be unpacked
from the root directory to install the Distutils.
The available formats for built distributions are:
Format |
Description |
Notes |
---|---|---|
|
gzipped tar file
( |
(1) |
|
bzipped tar file
( |
|
|
xzipped tar file
( |
|
|
compressed tar file
( |
(3) |
|
tar file ( |
|
|
zip file ( |
(2),(4) |
|
RPM |
(5) |
|
Solaris pkgtool |
|
|
HP-UX swinstall |
Changed in version 3.5: Added support for the xztar
format.
Notes:
default on Unix
default on Windows
requires external compress utility.
requires either external zip utility or
zipfile
module (part of the standard Python library since Python 1.6)requires external rpm utility, version 3.0.4 or better (use
rpm --version
to find out which version you have)
You don’t have to use the bdist command with the --formats
option; you can also use the command that directly implements the format you’re
interested in. Some of these bdist “sub-commands” actually generate
several similar formats; for instance, the bdist_dumb command
generates all the “dumb” archive formats (tar
, gztar
, bztar
,
xztar
, ztar
, and zip
), and bdist_rpm generates both
binary and source RPMs. The bdist sub-commands, and the formats
generated by each, are:
Command |
Formats |
---|---|
bdist_dumb |
tar, gztar, bztar, xztar, ztar, zip |
bdist_rpm |
rpm, srpm |
The following sections give details on the individual bdist_* commands.
5.1. Creating RPM packages¶
The RPM format is used by many popular Linux distributions, including Red Hat, SuSE, and Mandrake. If one of these (or any of the other RPM-based Linux distributions) is your usual environment, creating RPM packages for other users of that same distribution is trivial. Depending on the complexity of your module distribution and differences between Linux distributions, you may also be able to create RPMs that work on different RPM-based distributions.
The usual way to create an RPM of your module distribution is to run the bdist_rpm command:
python setup.py bdist_rpm
or the bdist command with the --format
option:
python setup.py bdist --formats=rpm
The former allows you to specify RPM-specific options; the latter allows you to easily specify multiple formats in one run. If you need to do both, you can explicitly specify multiple bdist_* commands and their options:
python setup.py bdist_rpm --packager="John Doe <jdoe@example.org>" \
bdist_dumb --dumb-option=foo
Creating RPM packages is driven by a .spec
file, much as using the
Distutils is driven by the setup script. To make your life easier, the
bdist_rpm command normally creates a .spec
file based on the
information you supply in the setup script, on the command line, and in any
Distutils configuration files. Various options and sections in the
.spec
file are derived from options in the setup script as follows:
RPM |
Distutils setup script option |
---|---|
Name |
|
Summary (in preamble) |
|
Version |
|
Vendor |
|
Copyright |
|
Url |
|
%description (section) |
|
Additionally, there are many options in .spec
files that don’t have
corresponding options in the setup script. Most of these are handled through
options to the bdist_rpm command as follows:
RPM |
bdist_rpm option |
default value |
---|---|---|
Release |
|
“1” |
Group |
|
“Development/Libraries” |
Vendor |
|
(see above) |
Packager |
|
(none) |
Provides |
|
(none) |
Requires |
|
(none) |
Conflicts |
|
(none) |
Obsoletes |
|
(none) |
Distribution |
|
(none) |
BuildRequires |
|
(none) |
Icon |
|
(none) |
Obviously, supplying even a few of these options on the command-line would be
tedious and error-prone, so it’s usually best to put them in the setup
configuration file, setup.cfg
—see section Writing the Setup Configuration File. If
you distribute or package many Python module distributions, you might want to
put options that apply to all of them in your personal Distutils configuration
file (~/.pydistutils.cfg
). If you want to temporarily disable
this file, you can pass the --no-user-cfg
option to setup.py
.
There are three steps to building a binary RPM package, all of which are handled automatically by the Distutils:
create a
.spec
file, which describes the package (analogous to the Distutils setup script; in fact, much of the information in the setup script winds up in the.spec
file)create the source RPM
create the “binary” RPM (which may or may not contain binary code, depending on whether your module distribution contains Python extensions)
Normally, RPM bundles the last two steps together; when you use the Distutils, all three steps are typically bundled together.
If you wish, you can separate these three steps. You can use the
--spec-only
option to make bdist_rpm just create the
.spec
file and exit; in this case, the .spec
file will be
written to the “distribution directory”—normally dist/
, but
customizable with the --dist-dir
option. (Normally, the .spec
file winds up deep in the “build tree,” in a temporary directory created by
bdist_rpm.)
5.2. Cross-compiling on Windows¶
Starting with Python 2.6, distutils is capable of cross-compiling between Windows platforms. In practice, this means that with the correct tools installed, you can use a 32bit version of Windows to create 64bit extensions and vice-versa.
To build for an alternate platform, specify the --plat-name
option
to the build command. Valid values are currently ‘win32’, and ‘win-amd64’.
For example, on a 32bit version of Windows, you could execute:
python setup.py build --plat-name=win-amd64
to build a 64bit version of your extension.
To cross-compile, you must download the Python source code and cross-compile
Python itself for the platform you are targeting - it is not possible from a
binary installation of Python (as the .lib etc file for other platforms are
not included.) In practice, this means the user of a 32 bit operating
system will need to use Visual Studio 2008 to open the
PCbuild/PCbuild.sln
solution in the Python source tree and build the
“x64” configuration of the ‘pythoncore’ project before cross-compiling
extensions is possible.
Note that by default, Visual Studio 2008 does not install 64bit compilers or tools. You may need to reexecute the Visual Studio setup process and select these tools (using Control Panel->[Add/Remove] Programs is a convenient way to check or modify your existing install.)
5.2.1. The Postinstallation script¶
Starting with Python 2.3, a postinstallation script can be specified with the
--install-script
option. The basename of the script must be
specified, and the script filename must also be listed in the scripts argument
to the setup function.
This script will be run at installation time on the target system after all the
files have been copied, with argv[1]
set to -install
, and again at
uninstallation time before the files are removed with argv[1]
set to
-remove
.
The installation script runs embedded in the windows installer, every output
(sys.stdout
, sys.stderr
) is redirected into a buffer and will be
displayed in the GUI after the script has finished.
Some functions especially useful in this context are available as additional built-in functions in the installation script.
- directory_created(path)¶
- file_created(path)¶
These functions should be called when a directory or file is created by the postinstall script at installation time. It will register path with the uninstaller, so that it will be removed when the distribution is uninstalled. To be safe, directories are only removed if they are empty.
- get_special_folder_path(csidl_string)¶
This function can be used to retrieve special folder locations on Windows like the Start Menu or the Desktop. It returns the full path to the folder. csidl_string must be one of the following strings:
"CSIDL_APPDATA" "CSIDL_COMMON_STARTMENU" "CSIDL_STARTMENU" "CSIDL_COMMON_DESKTOPDIRECTORY" "CSIDL_DESKTOPDIRECTORY" "CSIDL_COMMON_STARTUP" "CSIDL_STARTUP" "CSIDL_COMMON_PROGRAMS" "CSIDL_PROGRAMS" "CSIDL_FONTS"
If the folder cannot be retrieved,
OSError
is raised.Which folders are available depends on the exact Windows version, and probably also the configuration. For details refer to Microsoft’s documentation of the
SHGetSpecialFolderPath()
function.
- create_shortcut(target, description, filename[, arguments[, workdir[, iconpath[, iconindex]]]])¶
This function creates a shortcut. target is the path to the program to be started by the shortcut. description is the description of the shortcut. filename is the title of the shortcut that the user will see. arguments specifies the command line arguments, if any. workdir is the working directory for the program. iconpath is the file containing the icon for the shortcut, and iconindex is the index of the icon in the file iconpath. Again, for details consult the Microsoft documentation for the
IShellLink
interface.